Locomarine STANDARD 5 Series, Руководство по установке

Страница: 10 / 22

10
1.5. PORTS AND CONNECTORS
Yacht Router Standard is equipped with following ports and connectors.
Reset
(not in use)
DC in
10-30 V
SAT 1
Vessel
Network 2
Vessel
Network 3
Backbone ports 1-5
Vessel
Network 1
SAT 2
SPF+
DC out 1-3, 24 V DC out 4-6, 24 V
Fuse
DC out 1-3
Fuse
DC out 4-6
SAT 1 and SAT 2 ports
Satellite equipment input ports (VSAT, FBB, Iridium etc). It can also be used for any other Internet source equipment like ADSL or mobile router (2G/3G/4G).
Vessel Networks 1-3 ports
Ethernet LAN ports for various devices (e.g. computers, printers, IP cameras) that you want to integrate with dedicated Vessel Network. Each port dedication can be changed on demand
(e.g. Vessel Network 1 LAN port can be set to Backbone network).
Backbone ports
Backbone ports are part of Backbone network. Backbone network is network dedicated for communication between various Yacht Router equipment like Mobile Expander, WIFI Booster,
WIFI Extender, LAN Expander etc.
Backbone network cannot provide Internet access.
Each port dedication can be changed on demand (e.g. Backbone LAN port 3 can be set to Vessel
network 2).
CHAPTER 1 - INTRODUCTION