Быстрый старт с LocknCharge FUYL Tower 5! Получите бесплатное руководство по эксплуатации на нашем веб-сайте. Просто загрузите его с {вебсайта} и наслаждайтесь удобством и безопасностью хранения вашего электронного оборудования. Легко и удобно!
QUICK START
What’s required?
FUYL Tower 5 Network Kit
x5
x1
x1*
*Network hub not included. Note: The customer supplied
hub requires a minimum of 7 ports.
** Supplied with the FUYL Tower 5.
30cm
x1**
E5
1-5
Страница 1: ...QUICK START What s required FUYL Tower 5 Network Kit x5 x5 x1 x1 Network hub not included Note The customer supplied hub requires a minimum of 7 ports Supplied with the FUYL Tower 5 30cm x1 E5 x1 1 5 ...
Страница 2: ...1 2 Disconnect the pre installed ethernet cable from the internal RJ45 port at the rear of the FUYL Tower only Place your network hub not included inside the top shelf behind the control door ...
Страница 3: ... replace it with the RJ45 port plate ii Fix it in place with the locating screw i Route the hub s power cable through the rear hole to a power outlet ii Connect the network hub to the rear internal RJ45 port using the E5 ethernet cable ...
Страница 4: ...m i Connect all 5 shelves RJ45 ports to the network hub with the numbered ethernet cables ii Reconnect the pre installed ethernet cable from the control door to the network hub Plug the 30cm ethernet cables to the RJ45 port inside each shelf Network kit setup for the FUYL Tower 5 is complete 1 5 ...