LNS QUICK SIX, Руководство по устранению неисправностей

Страница: 60 / 124

Chapter 3: Procedures
QUICK SIX
3-9
Reference Procedure
This procedure is used for resetting the home position of the Quick Six. This parameter allows the user to purge a reference if the bar
feeder loses track of its position. BAR FEEDER LOCATION and ROTATION OF SERVO MOTOR in the BAR FEEDER SETUP
should be set prior to requesting a reference.
Procedure
Conditions:
•
Main bar feed power on
•
Air pressure set at 5 bar (75psi)
•
Main guiding channels open
•
No bar stock in the channel
•
Bar feed in STOP mode
Step 1: At the HOME PAGE , press the MENU key on the remote control station.
Step 2: Press the F4 (PAGE DOWN) key on the remote control station until Parameters Related to Miscellaneous
Functions appears.
Step 3:
Press the F3 (ENTER) key on the remote control station to open this menu.
Step 4:
Press the F4 (PAGE DOWN) key on the remote control station until the “ Request for Reference Point Settings ”
option appears.