MT-161-H V1.2
Fork Adjustments - Compression
The fork consists of a spring-loaded sheath and a sealed
cartridge hydraulic sheath.
The hydraulic adjustment of the compression is done on the
top of the fork, by turning the blue wheel marked
"compression".
There are 46 adjustment steps for compression.
Adjusting the compression
During an adjustment, it is preferable to start from an extreme
position by turning the screw to the stop and go to the desired
notch.
The factory setting is
4 notches since the stop clockwise.
SOFT
MEDIUM
HARD
Number
of
notches
0 - 15
16 - 31
32 - 46
Fork adjustment -Rebound
The hydraulic rebound adjustment is done by turning the
red button below the right lower
There are 15 notches for rebound adjustment.
Bounce Setting
When setting, it is best to start from an extreme position
by turning the screw to the stop and go to the desired
position.
The factory setting is
3 notches since the stop "slow".
SLOW AVERAGE FAST
Number
of
notches
0 - 5
6 - 10
11 - 15
LMX Bikes OWNER'S MANUAL LMX 161-H
2019
20
