Gocator Power and Ethernet Cordset
It is recommended that users purchase a Gocator Power/LAN cordset, such as 301176
listed on the Gocator Legal for Trade parts list. This cordset can be used to connect a
Gocator to the Smart Display, Ethernet Switch or a Laptop using the RJ45 connection and a
power supply using the pigtailed leads. The table below provides the connector pinout and
cordset lead color for connections to power and ground.
Function
Pin
Lead Color
GND_24-48V
L
Orange/Red
GND_24-48V
L
Orange/Black
DC_24-48V
A
Green/Red
DC_24-48V
A
Green/Black
Safety-
G
Blue/Black
J
Blue/Red
Two wires are connected to the ground and power pins.
Apply positive voltage to DC_24-48V.
Power requirements
Function
Pins
Min
Max
DC_24-48V
A
24 V (13 Watts)
48 V
GND_24-48VDC
L
0 V
0 V
The Sa signal should be connected to a voltage source in the range listed below.
The Safety_in- signal should be connected to the ground/common of the source supplying
the Sa.
Laser safety requirements
Function
Pins
Min
Max
Sa
J
24 V
48 V
Safety_in-
G
0 V
0 V
Gocator Legal for Trade User Manual
16