LMI Gocator 2000 Family, Руководство пользователя

Страница: 150 / 194

Ethernet Protocol • 150 Gocator 2000 Family
Reply
Field Type Description
length 64s Reply size – in bytes.
id 64s Reply identifier.
status 64s Reply status.
fileSize 64s Size of backup file – in bytes.
file[fileSize] byte Backup file content.
Restore
The Restore command uploads a backup file to the connected sensor and then restores all sensor files
from the backup.
Note that the sensor must be reset or power-cycled before the restore operation can be completed.
Command
Field Type Description
length 64s Command size – in bytes.
id 64s Command identifier (0x1014).
fileSize 64s Size of backup file – in bytes.
file[fileSize] byte Backup file content.
Reply
Field Type Description
length 64s Reply size – in bytes.
id 64s Reply identifier.
status 64s Reply status.
Restore Factory
The Restore Factory command restores the connected sensor to factory default settings. This command
has no effect on connected Buddy sensors.
Note that the sensor must be reset or power-cycled before the factory restore operation can be
completed.
Command
Field Type Description
length 64s Command size – in bytes.
id 64s Command identifier (0x4301).
resetAddress 64s Specifies whether network address should be restored to default:
0 – Do not reset address
1 – Reset address
Reply
Field Type Description
length 64s Reply size – in bytes.
id 64s Reply identifier.
status 64s Reply status.