LMI Gocator 2000 Family, Руководство пользователя

Страница: 115 / 194

Ethernet Protocol • 115 Gocator 2000 Family
Configuration Files
Configuration XML files contain settings that govern system behavior in the Running state.
Elements contain three types of values: settings , constraints , and properties . Settings are input values
that can be edited. Constraints are read-only limits that define the valid values for settings. Properties are
read-only values that provide supplemental information related to sensor setup.
When a configuration file is received from a sensor, it will contain settings, constraints, and properties.
When a configuration file is sent to a sensor, any constraints or properties in the file will be ignored.
Changing the value of a setting can potentially affect multiple constraints and properties. After uploading
a configuration file, the configuration file can be downloaded again to access updated values.
Configuration Example
<?xml version="1.0" ?>
<Configuration version="4">
<Setup>
<StartupState>0</StartupState>
<StartupMode>ProfileMeasure</StartupMode>
<SpotDetectionType>0</SpotDetectionType>
<Trigger>
<FrameRateMax>280.4711</FrameRateMax>
<FrameRateMin>0.0342</FrameRateMin>
<EncoderPeriodMax>1000000</EncoderPeriodMax>
<EncoderPeriodMin>1</EncoderPeriodMin>
<TriggerDelayMax>2147483647</TriggerDelayMax>
<TriggerDelayMin>0</TriggerDelayMin>
<TriggerSource>0</TriggerSource>
<SystemDomain>0</SystemDomain>
<FrameRate>-9223372036762542080</FrameRate>
<FullFrameRateEnable>1</FullFrameRateEnable>
<EncoderTriggerMode>0</EncoderTriggerMode>
<EncoderPeriod>0</EncoderPeriod>
<TriggerDelayMode>0</TriggerDelayMode>
<TriggerDelay>0</TriggerDelay>
<InputCalibrationTriggerEnable>0</InputCalibrationTriggerEnable>
</Trigger>
<Layout>
<CalibratedHeight>210</CalibratedHeight>
<CalibratedZ>-105</CalibratedZ>
<CalibratedWidth>249.872</CalibratedWidth>
<CalibratedX>-124.936</CalibratedX>
<Orientation>0</Orientation>
<Overlap>0</Overlap>
</Layout>
<Calibration>
<TravelSpeed>0</TravelSpeed>
<TravelResolution>0</TravelResolution>
<AlignmentTarget>0</AlignmentTarget>
<TravelTarget>1</TravelTarget>
<Disk>
<Diameter>0</Diameter>
<Height>0</Height>
</Disk>
<Bar>
<Width>100</Width>
<Height>10</Height>
<Holes>2</Holes>
<HoleDistance>10</HoleDistance>
<HoleDiameter>5</HoleDiameter>
</Bar>
</Calibration>
<Sensors>
<Sensor role="0">
<Profiling>
<ExposureMax>600000</ExposureMax>
<ExposureMin>30</ExposureMin>
<ActiveAreaHeightMax>210</ActiveAreaHeightMax>
<ActiveAreaZMax>104</ActiveAreaZMax>