LMI Gocator 2000 Family, Руководство пользователя

Страница: 104 / 194

Management and Recovery • 104 Gocator 2000 Family
Security
Gocator sensors can be secured with passwords to prevent unauthorized access. Each sensor has two
accounts: Administrator and Technician.
Gocator Account Types
Account Description
Administrator The Administrator account has privileges to view and edit all settings, and to
perform setup procedures such as sensor calibration.
Technician The Technician account has privileges to view the Dashboard Page and to
Start or Stop the sensor.
The Administrator and Technician accounts can be assigned unique passwords. By default, passwords
are blank (empty).
To set or change the password for the Administrator account:
1
Log in to the sensor as the Administrator using the current password.
2
Navigate to the Security Panel on the Connection Page.
3
Enter the new Administrator account password and password confirmation.
4 Click the Save Button.
The new password will be required the next time that an administrator logs in to the sensor.
To set or change the password for the Technician account:
1 Log in to the sensor as the Administrator.
2 Navigate to the Security Panel on the Connection Page.
3 Enter the new Technician account password and password confirmation.
4 Click the Save Button.
The new password will be required the next time that a technician logs in to the sensor.
If the administrator password is misplaced, the sensor can be recovered using a special software tool.
Refer to the Recovering Sensors section (page 107) in this guide for more information.