LMI Technologies Gocator 2100 Series Скачать руководство пользователя страница 354

Страница: 354 / 523

Gocator Line Profile Sensors - User Manual

Protocols • Gocator Protocol • 354

Field

Type

Offset

Description

16u

Command identifier (0x101B).

source[64]

char

Source file name.

destination[64]

char

Destination file name.

Field

Type

Offset

Description

length

32u

Reply size including this field, in bytes.

16u

Reply identifier (0x101B).

status

32s

Reply status. For a list of status codes, see

Commands

on page

343.

Read File

Downloads a file from the connected sensor (a .job file, a component of a job file, or another type of file;
for more information, see

Job Files

on page 270).

To download the live configuration, pass "_live.job" in the

name

field.

To read the configuration of the live configuration only, pass "_live.job/config.xml" in the

name

field.

Field

Type

Offset

Description

length

32u

Command size including this field, in bytes.

16u

Command identifier (0x1007).

name[64]

char

Source file name.

Command

Field

Type

Offset

Description

length

32u

Reply size including this field, in bytes.

16u

Reply identifier (0x1007).

status

32s

Reply status. For a list of status codes, see

Commands

on page

343.

length

32u

File length.

data[length]

byte

File contents.

Write File

The Write File command uploads a file to the connected sensor (a .job file, a component of a job file, or
another type of file; for more information, see

Job Files

on page 270).

To make a job file live, write to "_live.job". Except for writing to the live file, the file is permanently stored
on the sensor.

Содержание Gocator 2100 Series












































































































































































































































































































































































































































































































































Результаты поиска

Содержание Gocator 2100 Series

Отзывы:

LMI Technologies Gocator 2100 Series, Руководство пользователя, Страница: 354 / 523

Результаты поиска

Содержание Gocator 2100 Series

Отзывы: