- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
Thank you for selecting American Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly-please read
these instructions carefully before you begin.
RECOMMENDED TOOLS
1
M965743 Rev. 1.1 (11/18)
INSTALL FAUCET WITH OR WITHOUT DECK ESCUTCHEON
ESTATE
®
PULL-DOWN KITCHEN
FAUCET
Plumbers' Putty or Caulking
Adjustable Wrench
Phillips Screwdriver
Flat Blade Screwdriver
Certified to comply with ANSI A112.18.1M
CAUTION
Turn off hot and cold water
supplies before beginning.
•
(A) Installation less ESCUTCHEON (1)
. Make certain the SEAL
(9)
is properly seated in recess of faucet body. Insert
supply HOSES
(2)
, SPRAY HOSE
(7)
and SHANK
(3)
through mounting hole and seat SPOUT BASE onto sink or
mounting surface. Do not use putty.
•
(B) Installation with ESCUTCHEON (1 Optional)
. Apply a bead of putty to bottom edge of ESCUTCHEON with
PUTTY PLATE
(1)
. Make certain the SEAL
(9)
is properly seated in recess of faucet body. Insert SUPPLY HOSES
(2)
,
SPRAY HOSE
(7)
and SHANK
(3)
through hole of ESCUTCHEON with PUTTY PLATE
(1)
and mounting surface. Follow
mounting instructions below to secure faucet to mounting surface.
• Insert HOSES
(2)
through RUBBER WASHER
(4)
, BRASS WASHER
(5)
, and threaded LOCKNUT
(6)
.
• Assemble RUBBER WASHER
(4)
, BRASS WASHER
(5)
, and threaded LOCKNUT
(6)
onto SHANK
(3)
from underside
of sink or mounting surface. Hand tighten LOCKNUT
(6)
.
• Use a screwdriver to tighten SCREWS
(8)
on LOCKNUT
(6)
. Work your way around LOCKNUT
(6)
, tightening the
screws slightly each time until all are snug to ensure even pressure.
INSTALLATION
INSTRUCTIONS
4968.300
4968.305
Certified to comply with ANSI A112.18.1M
3
7
B (Optional)
A
PUTTY
SPOUT BASE
SINK OR
MOUNTING
SURFACE
SPOUT BASE
2
7
9
9
3
2
4
5
8
7
6
4
5
8
7
6
1
