Modi Buggy
™
Edition 7
p. 21
Fig. 27
Asymmetrical height adjustment
For asymmetrical height adjustment of
the
side supports
,
loosen the locking screws and
set the
desired height of the supports.
Fig. 27
. Next tighten the locking screws. Maximum height
difference is 20 mm. Greater asymmetry can be achieved by changing the side supports
height
through
loosening the locking knob
s
Fig. 26
.
8.12
Head supports adjustment
Fig. 28
Adjusting the width of the head supports
Loosen the locking knobs
Fig. 28
and set the desired width of the head supports in the range of 15
to
20 cm and its height ± 2 cm
Fig. 28.
T
ighten the locking knobs.
