MAS90: 5043-43250
SUMMIT
BUNK FRAME HARDWARE
QTY:
DESCRIPTION:
32
100MM DECORATIVE HEAD LAG BOLTS
1
4MM ALLEN WRENCH
4
1/2" X 3" FLUTED WOODEN DOWELS
20
6 X 1 1/4" PHIL FLAT PARTICLE BOARD SCREW
1
4MM DRIVER FOR POWER DRILL
7030-00449 KIT
ASSEMBLY: 2 PERSONS AND 60 MINUTES
TOOLS:
1)
4mm Allen Wrench (INCLUDED)
2)
4mm Allen Drill Bit (Be sure to FULLY SEAT bit into bolt head before turning)
3)
Phillips head Screwdriver or Drill with Phillips Bit
*We recommend using a power driver with the drill bit if available*
BE SURE THAT LAG BOLTS ARE STARTED INTO THE HOLES ON THE FRAME RAILS DURING
ASSEMBLY. DO NOT FULLY TIGHTEN UNTIL ASSEMBLY IS COMPLETE
