background image

TW

IN/FULL

 BUNK FRAME HARDWARE

QTY:

DESCRIPTION:

32

100MM DECORATIVE HEAD LAG BOLTS

1

4MM ALLEN WRENCH

4

1/2" X 3" FLUTED WOODEN DOWELS

20

6 X 1 1/4" PHIL FLAT 

SLAT

 SCREW

1

4MM DRIVER FOR POWER DRILL

7030-0

110

5

 KIT

Содержание MATEO / COTTAGE 7030-01105

Страница 1: ...N FULL BUNK FRAME HARDWARE QTY DESCRIPTION 32 100MM DECORATIVE HEAD LAG BOLTS 1 4MM ALLEN WRENCH 4 1 2 X 3 FLUTED WOODEN DOWELS 20 6 X 1 1 4 PHIL FLAT SLAT SCREW 1 4MM DRIVER FOR POWER DRILL 7030 01105 KIT ...

Страница 2: ... LL FEEL THEM SETTLE IN COMPLETELY Assembly 1 Attach two 3 tall mattress rails F to two bottom end assemblies D with 8 lag bolts and tighten per above instruction 2 Attach two 5 mattress rails E and four 3 guard rails F to top end assembly with 24 lag bolts and tighten per above instruction 3 Place four wooden dowels in the four holes of the two caps of set up bottom bunk assembly 2 per end piece ...

Страница 3: ... manufacturer or dealer for replacement parts 10 Use of a night light may provide added safety precautions for a child using the upper bunk 11 If the bunk bed will be placed next to a wall the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall This applies only to bunk beds without two full length guardrails 12 Always...

Страница 4: ...ATS Installation of individual slats for use with Bunkie Board Bunkie Board sold separately See your retailer for purchase of Bunkie Board SCREWS SCREWS SCREWS SCREWS SCREWS SCREWS INDIVIDUAL SLATS INDIVIDUAL SLATS INDIVIDUAL SLATS When used with a slat roll the three individual slats should be placed evenly in the gaps and underneath the strapping before fastening Individual Slat Individual Slat ...

Отзывы: