Living Spaces Judith Day Bed, Инструкция по сборке

Страница: 1 / 4

CONGRATULATIONS ON YOUR NEW BED PURCHASE
~Warning
：
do not move bed after final assembly as it may result in damages to floor and/or bed.~
Hardware included in rail’s carton to attach storage and support system.
1 2
Step#1
Align backrest carefully with Arms and push down firmly to assemble.
Step#2
Attach center support rails (O1) to Arm using Wrench(I), Bolt (B) and Washer (E)(factory
installed).
Attach side support rails (O) to Arm using Wrench(I), Bolt (B) and Washer (E)(factory
installed).
Attach bracket (U) to connect Arm and Back using Wrench(I), Bolt (B) and Washer (E).
I O O1 P P1 Q S S1 U
Φ8 MM Center support rail Side support rail Slats Storage
support rails
End clip Bracket
1PC 1PC 1PC 13PCS 4PCS 26PCS 3PCS 2PCS 2PCS
Judith Day Bed Assembly Instructions
*Bolt B and Washer E
are factory installed*
*Bolt B and Washer E
are factory installed*