WALL MOUNTING POSITION INSTRUCTIONS
NOTE: Your Living & Co panel heater should be installed with at least 300mm clearance from
the floor and any other surrounding parts including other appliances, side walls, ceilings,
shelves and soft furnishings.
300mm
300mm
300mm
300mm
CONTENTS (x 2 for 2-Pack)
1 x Living & Co Panel Heater
1 x Wall mounting accessories pack:
2 x Drill bits (1 x 7mm for plasterboard or wooden walls,
1 x 8mm for drilling masonry)
4 x Rail fittings
4 x Screw bolts
4 x Bolt caps
NOTE: Please ensure you use the correct drill bit for the wall surface material you are mounting on to.
Please contact your local hardware retailer or builder for advice.
Components
