10
OPERATION INSTRUCTIONS
General notes
During cooking, when pressing PAUSE/CANCEL button once, the program will be paused,
when pressing PAUSE/CANCEL button again, the program will be cancelled.
After the cooking cycle has ended, the display will show ‘End’ and an audible beep
sequence will sound every two minutes until the user presses any button or opens the door.
When in the process of setting, if a delay of approximately 30 seconds occurs in between
programming, the oven will return to standby mode.
Setting clock time
1.
In the standby mode, press CLOCK button once.
2.
Use number buttons to set the correct time.
3.
Press CLOCK button once to confirm.
NOTE:
This is a 12- hour clock. When the oven is first plugged in, the display will show
"ENTER", "CLOCK", "TIME". If you don't want to set the clock time, press the RESET button
once to bypass. During cooking, you can check the current clock time by pressing CLOCK
button.
Quick start
Use this feature to program the oven to microwave food at 100% power. In standby mode,
press START/+30SEC button repeatedly to set cooking time (each press will increase in 30
second increments up to 99 minutes and 99 seconds). The oven will start to cook
automatically.
NOTE:
During microwave cooking, you can add cooking time by pressing START/+30SEC
button. For Speed defrost, defrost by weight, cook by weight and auto cook menus you cannot
use this function to add cooking time.
Microwave cooking
1.
In standby mode, use number buttons to set cooking time. The longest time is 99 minutes
and 99 seconds.
2.
Press POWER LEVEL button once (default 100% power level), and then use number
buttons to set alternative power levels.
3.
Press START/+30SEC. button to confirm.
Use single digit to set cooking power level:
Press number button Power (Display)
Press number button Power (Display)
1,0
100% (100)
4
40% (40)
9
90% (90)
3
30% (30)
8
80% (80)
2
20% (20)
7
70% (70)
1
10% (10)
6
60% (60)
0
0% (0)
5
50% (50)
NOTE:
During cooking, you can check the power level by pressing POWER LEVEL button.
