Position the kettle on the power base.
Connect the supply plug into a power outlet. Press down the boil switch and the indicator will
illuminate, the kettle will then start to boil the water. The kettle will switch off automatically once
the water has boiled. If necessary, it will take you 30 seconds to wait before pressing the switch
again to re
‐
boil the water. You may shut off the power by lifting the boil switch up or directly lift the
kettle from the power base at any moment to stop boiling process.
NOTES
:
Ensure
that
the boil
switch
is
free
of
obstructions
and
the
lid
is
firmly
closed,
the
kettle
will
not
turn
off
if
the
switch
is
constrained
or
if
the
lid
is
open.
Lift
the
kettle
from
the
power
base
and
then
pour
the
water.
Take
extreme
care
when
pouring
the
water
from
your
kettle
as
boiling
water
can
scald
Do
not
open
the
lid
while
the
water
in
the
kettle
is
in
operation
or
still
hot.
The
kettle
will
not
re
‐
boil
until
the
switch
is
pressed
again.
The
kettle
may
be
stored
on
the
power
base
when
not
in
use.
Always
disconnect
the
power
supply
when
not
use.
BOIL
‐
DRY PROTECTION
Should you accidentally let the kettle operate without water, the boil
‐
dry protection function will
automatically switch off the power. If this occurs, allow the kettle to cool prior to filling with cold water
before re
‐
boiling.
CLEANING AND MAINTENANCE
Always disconnect the appliance from the power outlet and cool it down completely before cleaning.
Never immerse the kettle, power cord or power base in water, or allow moisture to contact with
these parts.
Wipe the external surfaces of the body with a damp warm cloth with soapy water. Never use
abrasive or chemical cleaners or scouring pads.
When not in use or in storage, the power cord may be wound under the bottom of the power base.
5
