Prior to Operation
NZ
SALES
AFTER
SUPPORT
0800
422
274
7
Place the dehumidifier in an upright position on a stable, flat surface.
Ensure the dehumidifier is at a safe distance at least 50cm away from a wall or furniture.
Supply power should be in correspondence with the value on the nameplate, power outlet needs to be
grounded.
Ensure the tank is correctly fitted, if the tank is full or not in place, the tank full light comes on and
the dehumidifier will stop working.
Continuous Drainage
In general, water will be collected by the integrated tank, if you want continuous drainage, please follow
the steps in figure 3.
a.Take out the water tank.
b.Insert a drainage pipe with a 12mm inner diameter into the drainage outlet.
c.Replace the water tank.
Note: always ensure the drainage pipe is going downhill, and is not blocked or kinked.
Ensure that the air in/outlet is not blocked.
≥20cm
≥
50
cm
≥
20
cm
≥20cm
≥20cm
Turn on the power.
Select the relative humidity that you want, for most applications this will be 55%rh.
