Living & Co DYD-S10A412, Инструкция по эксплуатации

Страница: 13 / 16

Storage
Display Error Codes
NZ
SALES
AFTER
SUPPORT
0800 422 274
12
If the dehumidifier will not be used for a long period of time, take the following steps:
1. Remove the plug from the socket and empty the tank the tank and the dehumidifier to , dry
completely. This may take a couple of days.
2. Clean the air filter .
3. Check the dehumidifier for damge.
4. Pack the device with the suitable packaging.
5. Store the dehumidifier in a dust-free and out of direct sunlight location, preferably covered with a
sheet of plastic.
Display Code
E1 E2
Error
Temperature sensor error Humidity sensor error
Display
Flash every 30 seconds Flash every 30 seconds
What is happening
Device still dehumidifies but is
in defrost mode only.
Device still dehumidifies but is
in continuous dehumidifying
mode only.
Please contact local distributor if any of the error codes below appears.