2. Mount the comb accessory into
the slots on both sides of the
product (a click will be heard),
and make sure it's mounted
correctly (Fig.18).
3. The included combs are optional
for different haircut lengths, such
as 3mm,5mm and 7mm, which
can be mounted as required. To
replace a comb, unload it from the
groove on one side first (Fig.19).
4. Press the ON/OFF button and move the
product slowly on hair. To get the best haircut
effect, it's necessary to move the product
against the growth direction of hair.
Clean
1. Pull out the hair clipper head and clean the
trimming part with the included brush or wash
the hair clipper head assembly with water.
2. Don't clean the product with such liquids as
abrasives, alcohol, petrol or acetone.
3. Clean the product immediately each time it's
used.
