10
GB
z
Assembly and installation
Please note:
dispose of all packaging
material� Decide prior to installation where
the product is to be mounted� Before drilling
the fixing holes, satisfy yourself that there is
no danger of drilling into or damaging gas
or water pipes or electricity cables in the
position where you are about to drill the
holes� Use a drill to drill the holes into the
masonry� Observe all safety instructions
provided in the operation and safety manual
for your drill� Otherwise there is a risk of
death or injury from electric shock�
When deciding where to mount the
light, pay attention to the following:
Ensure the product illuminates the desired
area� Make sure that the motion sensor
9
covers the desired area�
The motion sensor has a maximum
detection range of 8 m with a field of view
of approx� 100°�
Ensure that the motion sensor
9
is not in a
position where street lighting will shine on it
at night� This may impair the function�
The recommended installation height is 2 to
4 m�
Use the fixing holes
22
in the spotlight wall
bracket
21
(for mounting on building walls
or corners) to mark the positions for drilling
the holes (see Figs� F and G)�
Drill the holes (dia� 6 mm)�
Now insert the wall plugs
23
into the
drilled holes (see Fig� G)�
Offer the wall bracket
21
up to the
mounting surface and fix it in place with
the screws
24
without fully tightening them
(see Fig� G)�
Tighten the screws in the fixing holes and
align the LED solar spotlight
11
as
required�
The LED solar spotlight
11
can now simply
be slotted onto the wall bracket�
Aligning the LED Solar Spotlight
The reflectors
8
can be adjusted
horizontally (left/right) within a range of 65°
each way and vertically within a range of
65° (up) and 70° (down)� To do so, remove
the fixing bolt
7
and then align the
reflectors as desired.
Now align the motion sensor
9
, ensuring
that it faces directly towards the desired
detection zone�
Please note:
the motion sensor has a field
of view of up to 100°�
Mounting the solar panel
You have the option of mounting the solar
panel
1
directly on the spotlight, on a flat
surface (wall/roof), or on the lawn, for
example, using the ground spike
17
supplied with the product�
Please note:
the solar panel
1
should be
positioned where it will be exposed to as
much direct sunlight as possible� Even partial
shade during the day can significantly
impair the charging process�
Orientation:
The optimum alignment is facing south� It is
better to face the solar panel slightly to the
west than slightly to the east�
Mounting the solar panel on the
spotlight
Screw the screw fixing
3
together with the
connecting sleeve
2
and tighten it
hand-tight�
Now fix the solar panel/spotlight bracket
4
in the guide holes
10
in the LED solar
spotlight by pushing the guide rail
5
of
the bracket into the guide holes of the LED
solar spotlight until they lock into place�
Slot the solar panel
1
onto the solar
panel/spotlight bracket
4
�
Please note:
to detach the bracket again,
very carefully press the tabs on the sides of
the guide rail
5
until the bracket can be
removed�
Now plug the power cable
6
into the
charging socket
15
; to do so you must first
