6
LITTLE
WONDER
BLOWER
OPERATING SAFELY
IN GENERAL
–
Use extra care when loading or unloading the
machine into a trailer or truck.
–
Do not run the engine in an enclosed area where
dangerous carbon monoxide fumes can collect.
–
Never leave a running machine unattended.
Always stop engine when leaving the operator
position.
– Do not blow towards people, cars, windows, or
other items which could be injured or damaged
by the blown debris.
– Keep hands away from the blower air intake and
outlet.
STARTING
–
Start according to instructions in this manual or
on the machine.
–
Do not change engine governor settings or
overspeed the engine. Operating the engine
at excessive speed can increase the hazard of
personal injury.
INTERRUPTING OPERATION
-
Before leaving the operator's position:
- Park on level ground.
- Shut off the engine.
-
Stop the engine, and wait until the fan stops
moving:
- before refueling;
-
Stop the engine, and disconnect the spark plug
wire(s):
- before clearing blockages;
- before checking, cleaning or working on the
machine;
- if the machine begins to vibrate abnormally:
shut off machine immediately. Inspect
and have repairs made as needed before
restarting;
- except for repairs or adjustments as specifically
noted, such as for carburetor adjustment,
where the engine must be running. Keep
hands and feet clear of moving parts in these
circumstances.
-
Allow the fan to come to a complete stop when
stopping operation to clear blockages, unclog,
inspect the machine, do maintenance or repair.
-
Reduce the throttle setting during engine shut-
down and, if the engine is provided with a shut-
off valve, turn the fuel off at the conclusion of
operation.
OPERATING ON SLOPES
USE EXTRA CARE WHEN OPERATING ON SLOPES.
EVALUATE THE RISKS INVOLVED BEFORE OPER
-
ATING ON A SLOPE
.
-
Slopes are a major factor related to slip and fall
accidents that sometimes lead to severe injury or
death. All slopes require extra caution.
-
Do not operate on slopes if uneasy or uncertain.
Ultimate responsibility for safe operation on slopes
rests with the operator.
-
Do not operate on steep slopes. Poor footing could
cause a slip and fall accident.
-
Keep all movement on slopes slow and gradual.
-
Do not operate near drop-offs, ditches or embank-
ments. You could lose your footing or balance.
-
Do not turn on slopes unless necessary, and then
turn slowly and downhill when possible.
-
Be sure of your footing on slopes.
-
Watch for holes, ruts, bumps, rocks and other hid-
den objects. Uneven terrain could cause a slip and
fall accident. Tall grass can hide objects.
SAFETY
