bili-hut™ Home Quick Reference Card
NOTE:
Make sure to read and thoroughly understand the entire contents of the
bili-hut™ Home Use Guide
before operating the
bili-hut™
.
c.
Place the
nest mattress
in the
nest
so that the dark
section is facing up.
g.
Fill out the
bili-hut™
Home Record Sheet
.
f.
Connect the
bili-hut™
power cord to the assembled
power supply
. Plug the assembled
power supply
into a
safe and active electrical outlet. Press the power switch
on the power cord to turn on the
bili-hut™
and begin
treating your baby.
Part 1: Assembly and Operation
b.
Place the
bili-hut™
on a smooth, sturdy, even surface
such as a table 2 x 4 feet (0.6 m x 1.2 m) or larger.
h.
Complete prescribed phototherapy treatment.
NOTE:
Refer to
Part 2
of this card for any treatment
interruptions.
a.
With the
base mattress
attached to the
base
(straps of the
base mattress
snapped closed), attach
the four (4) magnetic clasps on the
shell
to the clasps
on the
base
to form the
assembled hut
. The clasps
should audibly “click” when in place. Gently tug upward
on the
shell
to check for secure clasp attachment.
Components
Alternatively, use a crib or other surface with barriers.
4 feet (1.2 m)
2 feet (0.6 m)
Little Sparrows
Technolog es
NOTE - Recommended room temperature:
select a location
for treatment where the room temperature can be maintained
between 70°F and 76°F (21.1°C and 24.4°C) for your baby's
comfort and safety during treatment.
d.
Slide the
nest
partially into the
assembled hut
. After
undressing your baby except for the diaper, place eye
protection over your baby's eyes. Place your baby in the
nest
so your baby’s head and neck lie entirely within the
dark section of the
nest mattress
.
NOTE:
See
Section 6
of the
bili-hut™ Home Use Guide
for assistance with
disposable nest packages
.
e.
Gently slide the
nest
further into the
assembled hut
until it touches the bumper on the
base mattress
.
power supply
nest mattress (disposable)
shell
nest (disposable)
base
base mattress