Lithium Grim ColoredThro, Инструкция по сборке

Страница: 4 / 13

ColoredThro v1.0
Manufacturers and product names are mentioned solely for circuit identification, and where applicable their trademarks are the
property of their respective owners who are in no way associated or affiliated with the author. No cooperation or endorsement
is implied.
4
Components
This PCB gives you the option to build a clone of either a Colorsound Powerboost,
Colorsound Overdrive or Throbak Overdrive Boost. Parts differ per type as described in the
table below. Decide which one you want to build and choose the appropriate parts. You
should also take a good look at the mods section for other options and required parts.
Colorsound Throbak Colorsound Throbak
Part Power boost Overdriver Overdrive Boost Part Power boost Overdriver Overdrive Boost
C1 220n 220n 220n IC1 ICL7990S ICL7990S ICL7990S
C2 22u 10u 22u Q1 BC169C BC109 2N2222A
C3 22u 22u 22u Q2 BC184C BC109 2N2222A
C4 22u 22u 22u Q3 NC NC 2N404
C5 220p 220p 200p Q4 BC109 BC109 2N2222A
C6 10u 10u 4u7 R1 NC NC 2M2
C7 10n 10n 10n R2 150k 150k 150k
C8 100n 100n 100n R3 1k2 470R 470R
C9 100n 100n 100n R4 120k 120k 120k
C10 10n 10n 10n R5 jumper 12k 12k
C11 22u 10u 22u R6 4k7 4k7 4k7
C12 220n 220n 220n R7 5k6 5k6 5k6
C13 10u 22u 22u R8 39k 39k 3k9
C14 100u 100u 100u R9 4k7 4k7 4k7
C15 100n 100n 100n R10 180k 150k 150k
C16 10u 10u 10u R11 33k 33k 33k
C17 10u 10u 10u R12 1k2 470R 470R
Cx 100p 100p 100p R13 12k NC NC
D1 NC NC 1N34A/1N270 R14 470R jumper jumper
D2 1N5817 1N5817 1N5817 SW1 jumper 2-3 jumper 2-3 2PDT/3PDT
D3 1N5817 1N5817 1N5817 SW2 NC NC SP3T ON/OFF/ON
D4 1N4001 1N4001 1N4001 SW3 SPDT SPDT SPDT
D5 NC NC LED Red 5mm VR1** B10k B10k B10k
D6 NC NC LED Red 5mm VR2** B10k B10k B10k
P1* NC NC B500k VR3** B10k B10k B10k
P2 B10k B10k C10k
P3 B100k B100k B100k
P4 B100k B100k B100k
P5 Jumper 2-3 Jumper 2-3 A100k
Capacitors with values < 1nF are MLCC, values of 1nF – 1uF are SMF (except C15, which can be MKT)
and all values > 1uF are Electrolyte. P1-P5 are 16mm Alpha pots (A=log, B=linear, C=rev. log) , VR1-
VR3 are 6 mm trimpots.
All parts must be rated 25V+
* The Throbak uses an internal pot. Use a Alpha 16mm (external) or a Bourns 3296W style (internal) trimpot
** See the Biasing section for options before choosing to solder the trimpots!