2016 | Lithionics Battery LLC | SOCV6 REV0
PRE-RELEASE
6
Using The SoC Meter’s Interface via SoC Display Unit:
T h e SoC meter has a dual line LCD screen capable of showing 2 pieces of data independently.
Pressing the upper button scrolls through available data on upper line, pressing lower button
scr o lls t h r o u gh available data on the lower line. Any combination of data is possible on
t h e s e 2 lines. The following list explains all available data counters:
E
█
█
█
█
█
█
F
– Graphical representation of the Fuel Gauge. Each of the 6 bars corresponds to
approximately 17% of capacity.
100% Fuel
– Percentage of digital Fuel gauge. Fuel is derived from SoC minus the Low Fuel setting
explained in the Calibration/Settings section below.
100% SoC
– State of Charge. The percent of usable energy left in the battery.
23.4 A
– Amperage. Instant current reading. A “+” sign in front of the value indicates charging
current. No sign indicates discharging current.
20000 W
– Instant Wattage reading. This power value is derived by multiplying current and
voltage. This is useful to estimate how much instant power is passing through the battery
circuit. This value can be manually converted to horse power by the formula: Watts/745.7=HP
39.6 V Pk
– Pack voltage reading.
82F Tmp
– Instant temperature reading at the sender board location. Can be set to C or F. See
“Zero-Point Calibrations and Settings” section.
100.0 Ah
– Remaining Amp Hour capacity of the battery.
3960 Wh
– Remaining Watt Hour capacity of the battery. Watt Hour value is derived by
multiplying t h e Amp Hour value and the Pack Voltage together. This value will be changing
dynamically as voltage fluctuates with load.
