LiteOn NA130 845PE Series, Руководство пользователя, Страница: 75 / 84

1. Windows XP
Installing Driver During New Windows XP Installation
(1) Locate the files under CD_Disk:\SATA\NA130\.. from the CD
installer and copy it all down to a empty floppy disk.
(2) Start the installation:
a. Floppy Install: Boot the computer with the Windows XP
installation diskettes.
b. Floppyless Install: Boot from floppy and type “WINNT”.
After files have been copied, the system will reboot. On the
reboot, press <F6> after the message “Setup is inspecting
your computer’s hardware configuration...” appears.
c. CD-ROM Install: Boot from the CD-ROM. Press <F6> after
the message “Press F6 if you need to install third party SCSI
or RAID driver” appears.
(3) When the “Windows XP Setup” window is generated, press “S”
to Specify an Additional Device(s).
(4) Insert the pre-made driver diskette into drive A: and press
“Enter” key.
(5) Choose “WinXP Promise SATA150 TX2Plus (tm) IDE Controller”
from the list that appears on screen, and then press the “Enter”
key.
75