Lite-On Technology Corp.
Industrial Automation
60
Chapter 4
Panel and Operation
4.1.
Panel display and key description
Name
Function
Display
Five seven-segment displays are used to show the monitoring, parameter and setting
values.
MODE key
It is used to switch between the monitoring mode, parameter mode and alarm display.
When editing the mode, press the MODE key to exit to the parameter mode.
SHIFT key
The group code can be changed in the parameter mode. In the editing mode, shift the
blinking character to the left would be able to modify the higher character value that is set.
In the monitoring mode, the display of the high/low order digit can be switched.
UP key
It is used to change the monitoring code, parameter code or setting value.
DOWN key
It is used to change the monitoring code, parameter code or setting value.
SET key
It is used to display and store the setting value. In the monitoring mode, it is possible to
switch to the decimal/hexadecimal number system. In the parameter mode, press the SET
key to enter the editing mode.
Power indicator
UP key
Display
SHIFT key
SET key
MODE key
DOWN key
