WiZ Quick Setup Guide
Downloading the WiZ App
Before you start, make sure you install the WiZ App from either
Google Play
or the
Apple App Store
(both offer the same set of features). The app can also scale to fi t
tablets as needed.
NOTE:
Upon fi rst boot-up, the fi rmware may need to be updated. Please allow up to 1 minute for the
OnCloud Adapter to update after completing WiZ app setup.
QR CODE
Direct to
Apple app store / Google play store
Installing and pairing OnCloud Adapter
The OnCloud Adapter is connected through the app and will only operate on your
home’s 2.4GHz Wi-Fi network. Most new routers are dual bandwidth (both 2.4GHz
and 5GHz), ensure you select the 2.4GHz network which covers a wider range than
the 5GHz. To make sure your phone is on the 2.4GHz network, either select it in the
list of available networks on your phone or go into the router settings and temporarily
de-activate the 5GHz network (you can activate it again after pairing is done).
If pairing is unsuccessful, trigger manual pairing mode. To enter manual pairing mode,
cycle the power to the OnCloud Adapter 3 times (ON/OFF) with a 1-2 second pause in
between each ON. Then the light will pulse, and it is ready to connect.
NOTE:
If re-pairing the OnCloud Adapter and it is not deleted from the app fi rst, then
repeat the manual pairing process except use 5 times (ON/OFF) power cycles.
For additional support, visit www.liteline.com/WiZsupport
www.wizconnected.com/startpro