Copyright © 2021, Liteline Corporation. All rights reserved.
LITELINE CORPORATION
Telephone 1.866.730.7704 | Fax 1.888.738.9736 liteline.com
UM_LC-DVR-CV96W1_8.27.21
The following importer is the responsible party:
LLC Sales, Inc. DBA Liteline USA
1209 Orange Street, Wilmington, DE, 19801
liteline.com/contact-us
Changes or modifi cations not expressly approved
by the responsible party could void the user’s
authority to operate the equipment.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures: (1) reorient or relocate the receiving
antenna; (2) increase the separation between
the equipment and receiver; (3) connect the
equipment into an outlet on a circuit different
from that to which the receiver is connected; (4)
consult the dealer or an experienced radio/TV
technician for help.
RF Exposure Requirements:
This device complies with FCC RF radiation
exposure limits set forth for an uncontrolled
environment. The antenna(s) used for this
transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter
and must be installed to provide a separation
distance of an least 20cm from all person.
ISED Canada Statement
This device contains licence-exempt
transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is
subject to the following two conditions: (1) this
device may not cause interference; and (2) this
device must accept any interference, including
interference that may cause undesired operation
of the device.
Déclaration de Conformité ISDE Canada
L’émetteur/récepteur exempt de licence contenu
dans le présent appareil est conforme aux
CNR d’Innovation, Sciences et Développement
Économique Canada applicables aux appareils
radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1)
L’appareil ne doit pas produire de brouillage;
et (2) L’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le
fonctionnement.