EDX-B02D [EUM-B]
7
2-5 ID No. Setting
Each EDX series device must have a ID No.. When one device is working alone, there is no
need to adjust the ID No., but when several devices are working together, each device must
have a different ID No.
STEP-1: On the main page, press
【
FCN
】
twice to enter ID NO. setting.
STEP-2: Press
【
▲
】
or
【
▼
】
to change ID NO.. (Up to 999)
STEP-3: After setting, press
【
DMX
】
to save, press
【
FCN
】
to exit.
2-6 Zone Setting
Definition of zone: The device must set the Zone No. before using, which consists of two parts,
one is the zone no. and another is the start channel address.
2-6-1 Single/Multi Zone Setting
STEP-1
：
On the main page, press
【
FUNC
】
7 times to enter Zone setting.
STEP-2: Press
【
▲
】
or
【
▼
】
to choose ON or OF
In which:
ON—Multi Zone state
OF—Single Zone state
STEP-3: After setting, press
【
DMX
】
to save, press
【
FCN
】
to exit.
2-6-2 Single Zone Setting
STEP-1: On the main page, press
【
FCN
】
once to enter single zone setting. The cursor
will blink:
Blink
Blink
Blink, zone is 1
Blink, ID NO. is 1
