Lissmac UNICUT 520, Руководство по эксплуатации

Страница: 34 / 92

34/92
5.2.4. Pre-selection page 2
Displays and default settings for display and features.
Settings of joystick
buttons
The pre-selection is made via the rotary push-button. (current selection box is marked with a red border)
Press to activate the highlighted selection box.
Activated symbols are white, while inactive symbols are greyed out.
Item 1 Button for switching to dashboard
Item 2 Direct selection of socket 1 on/off
Item 3 Direct selection of socket 2 on/off
Item 4 Direct selection of socket 3 on/off
Item 5 Direct selection of socket 4 on/off
Item 6 Selection for multifunction button 3 (slurry extraction)
or Item 7 Selection for multifunction button 3 (switchable socket 1)
or Item 8 Selection for multifunction button 3 (switchable socket 2)
or Item 9 Selection for multifunction button 3 (switchable socket 3)
or Item 10 Selection for multifunction button 3 (switchable socket 4)
Dashboard settings The pre-selection is made via the rotary push-button.
(current selection box is marked with a red border)
Activate the selection box by pressing the rotary push-button.
Turn to select the desired function and set it by pressing again.
Activated symbols are white, while inactive symbols are greyed out.
Green cross = no pre-selection = no presentation on the dashboard
Item 11 Selection of sockets that are switched directly on the dashboard
Item 12 Selection of sockets that are switched directly on the dashboard
Item 13 Direct selection of Comfort mode (see 7.5)
Item 14 Option Water pump
Item 15 Option Steering Mode
Arbitrary selection of functions using the joystick button 3
By selecting the sockets, any 12V DC consumer up to 10A can be used.
e.g. rotating beacon or work light
6
10
9
8
7
11
1
2
3
4
5
12
13
15
14