Lissmac MULTICUT 605 SG Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 107

Lissmac MULTICUT 605 SG Скачать руководство пользователя страница 31

31/107

5.

TRANSPORT

5.1.

Transport position

WARNING

Crush hazard from unsecured machine

Injuries through unintentional position change of the machine or falling of parts.



Only transport the floor saws in the transport position



Secure the floor saw via the attachment point

NOTICE

Transport of the machine

Large inclined positions must be avoided during the transport of the floor saw.
Fuel can spill or engine oil can enter the combustion chamber of the motor and damage the motor.

Maximum inclination in all directions 30°. Only transport in an upright position.
All movable parts, which could fall, swing during transport must be removed.

Transport position

•

Stop engine

•

Activate parking lock

•

Remove blade guard

•

Remove saw blade

•

Fold up and secure steering rod with rope

•

Remove handle bars

•

Remove or secure any loose parts

«
...
29
30
31
32
33
...
»

Содержание MULTICUT 605 SG












































































































Отзывы:

Нет отзывов