17
2020-03
Operation
17
Subject to change. |
5
Operation
This chapter contains instructions on operating steps that are usually required during normal
operation.
Initial operation
For information on the initial set-up of
iFerm Nano Terminal
, read the
chapter
.
5.1
Notes on operation
5.1.1
Concepts and illustrations
Since the actual display depends on the type and number of the connected devices, the screen
-
shots used in these instructions are only examples for illustrative purposes.
Since
iFerm Nano Terminal
can be operated via a network-capable end device or on the device
itself, no language differentiation has been made in the instructions: “Press ...” means that you
either touch the terminal’s touch screen with your finger or click on another input device.
5.1.2
General operating instructions
Basically you can perform all inputs via the terminal’s touch screen or via the optionally available
Web interface function of an end device connected to the terminal. Perform the inputs on the
touch screen during the initial commissioning.
Information
Green areas are buttons or input fields.
5.1.3
Buttons
When performing an input via the terminal’s touch screen, touch the buttons with your finger.
When performing an input via the Web browser of a connected end device, use the mouse or
touch pad in the usual way.
DE
EN
DE
DE
DE
DE
DE
DE
