Dive Computer
User Manual
Liquivision Products, Inc
-
49
-
Revision 1.9 Software 1.17
If you set your Brightness setting to “Low”, the Auto Dim feature will have no effect.
The default Auto Dim setting is “Off”. You can adjust it in 10m / 30ft increments.
You have the option to switch between display layouts underwater.
7.3 Layout
In Rec and Tec Modes your KAON comes with a two underwater display layouts “Standard” and
“Graphic”. When diving within the no decompression limit, both displays are identical. However, when
you incur deco, the “Standard” display provides your deco information verbally “Stop” and “For”,
while the “Graphic” display uses the hand and clock icons.
Diving within NDL Limit
STANDARD – in DECO
GRAPHIC – in DECO
In Gauge Mode your KAON comes with a four underwater display layouts to choose from:
STANDARD
SIMPLE
ALTERNATE
LARGE
This option is displayed only if you are “underwater” in a simulated dive (to learn more about dive
simulation, please refer to the “
8. Stop Simulation
” section of the manual). In such a case, choosing this
will immediately stop simulation, and return back to the surface menus.
