Dive Computer
User Manual
Liquivision Products, Inc
-
47
-
Revision 1.9 Software 1.17
This menu item appears only when you are in Gauge mode.
4. Stopwatch (only in Gauge Mode)
The “Stopwatch” is a timer that you can turn on and off, start, pause, and restart during your dive. Here
is how it appears in each of the four screen layouts:
STANDARD
SIMPLE
ALTERNATE
LARGE
If the Stopwatch is “Off”, your KAON’s underwater menu has an item called “Stopwatch On”. If you
select this item by tapping either side of your KAON unit, you will activate the Stopwatch function and
you will see your dive display rearrange itself – it will show the Stopwatch in addition to the
information it was previously displaying.
When the Stopwatch function is “On” and you return to the underwater menus, you will see a menu
item called “Stopwatch”, and this takes you to the submenus that control the use of the stopwatch.
Stopwatch Shortcut
: if the Stopwatch is “On”, then by tapping three/five times on a SIDE (not the
top) of your KAON, you will be taken directly to the stopwatch sub-menu:
-
Stop / Start
-
: depending on whether the Stopwatch is running or paused at the moment,
this will either say “Stop” or “Start”. Choosing “Stop” will pause the stopwatch if it is
running, and “Start” will re-start the stopwatch, if it is paused. Initially, when you turn
the Stopwatch on for the first time during your dive, it is paused.
Reset
-
: this will set your Stopwatch count to 0. If the Stopwatch is running, it will keep
running – now, counting again from 0.
Off
: this will pause the Stopwatch and turn it off. The dive display will return back to
normal. If you turn your stopwatch back on later, it will have same count as when you
turned it off.
Bear in mind, that to make it easier for you to operate the stopwatch, the items in the stopwatch
submenu change order:
-
If the stopwatch is running, first item is "Reset", and second item is "Stop".
-
If the stopwatch is not running, first item is "Start", and second item is "Start".
