Liquid Controls LectroCount LCR-II E3655 Series, Руководство по установке

Страница: 3 / 36

3
safeTy ProCedUres
!
WarnInG
• Before using this product, read and understand the instructions.
• All work must be performed by qualified personnel trained in the proper application, installation, and
maintenance of equipment and/or systems in accordance with all applicable codes and ordinances.
• When handling electronic components and boards, always use proper Electrostatic Discharge (ESD) equipment
and follow the proper procedures
• Make sure that all necessary safety precautions have been taken.
• Provide for proper ventilation, temperature control, fire prevention, evacuation, and fire management.
• Provide easy access to the appropriate fire extinguishers for your product.
• Consult with your local fire department, state, and local codes to ensure adequate preparation.
• Read this manual as well as all the literature provided in your owner’s packet.
• Save these instructions for future reference.
• Failure to follow the instructions set forth in this publication could result in property damage, personal injury, or
death from fire and/or explosion, or other hazards that may be associated with this type of equipment.
!
WarnInG
Power, input, and output (I/O) wiring must be in accordance with the area classification for which it is used (Class I, Div 2).
For North America, installations must be per the U. S. National Electrical Code, NFPA 70, or the Canadian Electrical Code
in order to maintain Class I, Division 2 ratings. This may require using connections or other adaptations in accordance
with the requirements of the authority having jurisdiction.
WARNING: Explosion Hazard -
Substitution of components may impair suitability for Class I, Division 2 applications.
WARNING: Explosion Hazard -
When in hazardous locations, turn power OFF before replacing or wiring modules.
WARNING: Explosion Hazard -
Do NOT disconnect equipment unless power has been switched OFF or the area is known to be Non-Hazardous.
Before disassembly of any meter or accessory component:
ALL INTERNAL PRESSURES MUST BE RELIEVED AND ALL LIQUID DRAINED FROM
THE SYSTEM IN ACCORDANCE WITH ALL APPLICABLE PROCEDURES .
-Pressure must be 0 (zero) psi.
-Close all liquid and vapor lines between the meter and liquid source.
For
Safety Rules Regarding LPG
, refer to
NFPA Pamphlet 58
and local authorities.
Failure to follow this warning could result in property damage, personal injury, or death from fire and/or explosion, or other
hazards that may be associated with this type of equipment.
!
WarnInG
be Prepared
observe national and
local Codes
safely evacuate
Piping system