Liquid Controls LectroCount LCR-II E3655 Series, Руководство по установке

Страница: 12 / 36

12
leCTroCoUnT GroUnd sTraP KIT
lectroCount Ground strap Kit
All seat cushions are grounded in a similar manner.
The illustrations on the next page detail the following
instructions for grounding three typical types of truck
seats.
To ground a truck seat:
1. Identify any adjustable, shock absorbing seat in the truck
cab. These seats will typically have pivot points, hinges,
or other mechanical design features that make seat
adjustments possible.
2. Find an existing screw or hole near the back of the seat
frame, close to the cab floor. If a hole or screw does not
already exist, drill a 9/32” hole in the seat frame.
3. Attach one end of the ground strap to the seat frame
bracket using the lock washer, flat washer and nut
provided.
4. Find an existing screw or hole, or drill a 9/32” hole,
in the part of the seat frame—above all pivots and
adjustments—that is attached directly to the seat cushion.
Make sure that there are no intervening pivot points,
guides, adjustment mechanisms, etc., which could
interfere with the ground path between the seat cushion
and the ground strap.
4a. If the seat cushion has a wooden base, use a wood
screw and washer to attach the strap lug to the bottom
of the seat at a point where the seat fabric is attached to
the wood. There must be good contact between the seat
fabric and ground strap lug.
5. Use the wire ties provided with the kit and tie off the strap
so that it doesn’t interfere with the movement of the seat
and is clear of traffic areas in the cab.
6. Check the strap for a good ground connection (see
below).
Remove any dirt or oxidation from the ground strap
contact point. Lock washers should penetrate any
paint to ensure a good electrical connection.
Ensure a Good Ground
6
1
2
3
3
5
8
4
9
LectroCount Ground Strap Kit - 82185
Install the LectroCount Ground Strap Kit
before installing the LectroCount register.
.
esd Precaution
.
Some truck seats, typically passenger seats, are
not adjustable and do not require grounding.
Grounded Passenger Seats