Liquid Controls LectroCount LCR-II E3655 Series Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 36

background image

10

InsTallaTIon overvIeW

Installation overview

If the LectroCount LCR-II was ordered as part of a meter system, it will arrive mounted on the meter and prewired to

the ETVC probe, air eliminator, and valve.

Installation overview for lCr-II ordered with meter system:

1.  Ground truck seat cushion. Page 12
2.  Install meter system onto truck or fixed installation. Refer to meter manual.
3.  Run the LCR-II’s data and power cable to truck cab or power supply. Page 17
4.  Connect any additional components to the LCR-II’s CPU board.
5.  Mount printer and connect printer data cable. Page 27
6.  Connect the LCR-II and the printer to power supply. Page 29
7.  Setup and calibrate the LCR-II. Refer to manual EM150-11.

If you are replacing an existing register, you must mount the register onto the meter and make the proper connections

to all of the components.

Installation overview for lCr-II ordered without meter system:

1.  Ground truck seat cushion. Page 12
2.  Mount the LCR-II to the meter. Page 14
3.  Run the LCR-II’s data and power cable to truck cab or power supply. Page 17
4.  Connect all components to the LCR-II’s CPU board.
5.  Mount printer and connect printer data cable. Page 27
6.  Connect the LCR-II and the printer to power supply. Page 29
7.  Setup and calibrate the LCR-II. Refer to manual EM100-11.

Before installation, check your shipment against the

packing list and ensure that no parts are missing. The

packing list is inside the red information packet along with

the Installation and Operation Manuals.

Check Each Shipment

Specific installation requirements will vary with the model of the truck, the physical layout

of a fixed installation, the configuration of any existing metering equipment, the options

selected, and the type of fluid being metered

Installation Requirements Vary

This manual explains and details the mechanical installation of the

LectroCount LCR-II and the temperature probe as well as the electrical and

data installation of all components that connect to the LCR-II. For additional

installation information, refer to the manuals of the other components. All

manuals are available at www.lcmeter.com.

This Manual Includes

«
...
8
9
10
11
12
...
»

Содержание LectroCount LCR-II E3655 Series





































Отзывы:

Нет отзывов

Похожие инструкции для LectroCount LCR-II E3655 Series

Бренд: Tactical Controls Страницы: 11

Бренд: FarmChem Страницы: 8

PLATINUM Series

Бренд: Hach Страницы: 64

Бренд: J.P. Instruments Страницы: 9

Бренд: J.ASSY Страницы: 13

LaserRange-Master T4 Pro

Бренд: LaserLiner Страницы: 68

DC1500 CHLORINE

Бренд: LaMotte Страницы: 60

Бренд: YOKOGAWA Страницы: 53

Бренд: YOSensi Страницы: 26

Бренд: YOSensi Страницы: 26

Бренд: Hanna Instruments Страницы: 2

Бренд: Rabid Elephant Страницы: 18

Бренд: Rae Страницы: 38

Бренд: FlowLine Страницы: 2

Бренд: Hanna Instruments Страницы: 2

Бренд: Interacoustics Страницы: 54

Бренд: PCB Piezotronics Страницы: 10

Бренд: SICK Страницы: 68

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды