Operating instructions
4point light 10W (V 4.58)
Page 67 of 130
G
M
L
8.5.4 Run
Under the
menu item “Run” measurement in tomography mode is started.
1.
Select “Run” from the tomography menu with [
] and [
]
2. Confirm input with [RET]
Run tomography
Parameter set: 0
080424Test
Fig. 8.55: Select parameter set
3. Select number of parameter set with [
] and [
]
4. Confirm input with [RET]
Electrode parameter
Distance[m]: 2.000
Position[m]; 0.000
First: 1 Last:89
Fig. 8.56: Edit electrode parameters
Parameters
Function
Distance[m]
Set distance between electrodes (m)
Position[m]
Set the start position of the profile in (m)
First: 1
Set first electrode
Last: 89
Set last electrode
Tab. 8.49: Electrode parameters
5. Edit electrode parameters by using the numerical keys and [
]
6. Move to the next line with [
] and [
]
7. Confirm input with [RET]
Measurement param.
Min. volt[mV]: 20.00
Max. error[%]: 0.1
Avg:8
Frq:2.08
Fig. 8.57: Edit measurement parameters