Page 26 of 130
Operating instructions
4point light 10W (V 4.58)
7.2 Switch off the instrument
→
Press [ESC] until the instrument is switching off
7.3 Use of keypad
The instrument is controlled via the keypad. The key assignment is shown in the table.
Some keys serve multiple functions.
Fig. 7.2: Keypad
Key assignment
Reaction
Multiple function
[
]
back
[
] / [
]
up/down
yes
[RET]
Confirm selection
[ESC]
Cancel
[
▪
]
Point
[0]
… [9]
Numerical Keys
yes
Tab. 7.1: Key assignment
Key assignment
Multiple function
[
] / [
]
Select output current
[7], [1]
Select measurement frequency with f+, f-
[3], [9]
Select L/2 in VES mode
[4], [6] and [2], [8]
Navigation In X- and Y-direction in Mapping mode
Tab. 7.2: Multiple functions of several keys
Multiple functions
: Depending on the program mode, several keys serve multiple functions.
➔
➔