Lippert WIFI ON-THE-GO, Быстрый старт

Страница: 6 / 20

6
Introduction
The WiFi On-the-Go is a portable device but can be fastened
to a mounting surface if desired. If the external cellular antenna
is not a permanent mount there are a number of methods of temporary
mounting that can be utilized at the retail customer’s discretion, i.e. hook
and loop material, two-sided tape, etc. Use the method best suited for
the temporary mounting surface. If the external cellular antenna is not
permanently attached with all weather sealant, the antenna should not
be exposed to water.
The 12V DC/DC power adapter
(Fig.1F) can be used to ensure a smooth
power supply to the cellular gateway when connected to various 12V
batteries or systems such as vehicle, solar power bank, etc. The user
will need to determine which connection type they will need to add to
the red/black wires, such as a cigarette lighter adapter or banana clips,
to suit their specific application.
Activation
Data package required to activate the WiFi On-the-Go. Before visiting
AT&T
®
or T-Mobile
®
, make sure to have the IMEI (International Mobile
Equipment Identity) number available. The IMEI number is printed on
the WiFi On-the-Go
™
label
(Fig.2A)
.
The IMEI number is a unique 15-digit serial number given to every
device, which can then be used to check information such as the
device’s Country of Origin, the Manufacturer and its Model Number.
Whether currently an AT&T
®
or T-Mobile
®
Wireless customer or not,
contact AT&T
®
or T-Mobile
®
customer service or visit the nearest AT&T
®
or T-Mobile
®
Wireless corporate store to purchase a nano SIM card.