5
432-LIPPERT (432-547-7378)
Rev: 01.28.22
Tire Linc
™
LCD Display
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0004222
8.
Select the type of vehicle to be set up by choosing
one of the pictures shown on the display
(Fig.8)
and
tap CONTINUE.
Fig.8
9.
Determine if a spare tire will be added
(Fig.9)
. Tapping
YES will add the spare tire icon to the vehicle selected.
Fig.9
10.
After tapping YES or NO for a spare tire, the
display will automatically change to the
LEARN ALL
SENSORS
mode.
Sensor Pairing Sequence
The pairing sequence for tires begins with the left front
tire
(Fig.11-1)
first, continuing from front to rear and then
beginning again at the right front
(Fig.11-5)
and continuing to
the rear tires
(Fig.11-4 and 8)
. The spare tire
(Fig.11-9)
is last.
With dual wheels on a vehicle, the outside tire
(Fig.11-2 and 6)
on either side is paired first before the inside
tire
(Fig.11-3 and 7)
.
Figure 11 provides an example of the pairing sequence for
tires on any vehicle.
11.
A notification will appear on the display for 5
seconds
(Fig.10)
instructing you to turn off all other
displays connected to your repeater before automatically
transitioning to the notifications received before sensor
learning takes place.
Fig.10
12.
Notifications will instruct how to learn internal and
external sensors.
13.
Continue to the Learn All Sensors section and use the
steps for learning sensors.
