Rev: 07.11.2022
Page 1
CCD-0006247
THULE 5200 AWNING MOTOR
REMOVAL/REPLACEMENT
TI-424
AWNINGS
Purpose
This document outlines the removal and replacement of the Thule 5200 Awning motor.
Safety
Read and understand all instructions before installing or operating this product. Adhere to all safety labels.
This document provides general instructions. Many variables can change the circumstances of any procedure,
i.e. the degree of difficulty involved in the service operation and the ability level of the individual performing
the operation. In the event the skill level required is too advanced or the procedure too difficult, a certified
technician should be consulted before performing the necessary operation. Failure to correctly install, remove
or service the system may result in voiding the warranty, inflicting injury or even death.
Procedure
1.
Extend the awning 12" - 18 " inches (Fig. 1).
Fig. 1
Fig. 2
A
A
• Ladder
• Star screwdriver (various sizes)
• Adjustable straps
• Duct tape
Resources Required
2.
Secure the arms on both sides of the awning with adjustable straps (Fig. 2A) to keep the awning from
opening. Secure the straps with duct tape to keep the straps from sliding along the arms.
