LUVERNETRUCK.COM
•
PRODUCT SUPPORT: 877.287.8634
•
401720-INS-RA
•
02/22/2022
•
ECN9236
•
PAGE 1
Product Registration and Warranty
LUVERNE stands behind our products with industry-leading warranties. To get copies of the product
warranties, register your purchase or provide feedback, visit:
warranty.curtgroup.com/surveys
INSTALLATION MANUAL
401720
Parts List
Qty Description
2
Mounting bracket
2
AC mounting bracket
2
AC top mounting bracket
2
U-bolt, 3-3/4"
12
Lock washer, 5/16"
8
Thread-cutting bolt, 5/16"
14
Washer, 5/16"
8
Flange nut, M8
8
Hex bolt, M8
8
Clip nut, M8
4
Spacer
4
Bolt retainer
Tools Required
Socket, 1/2"
Ratchet
Wrench, 1/2"
Drill
Flathead screwdriver Drill bit, 3/8"
Marker
Drill bit, 3/32"
Putty knife
Drill bit, 19/64"
Maintenance
Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive
cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Product Photo
Front
Rear
Torque Specifications
M8 bolt
20 ft-lbs.
5/16" bolt
20 ft-lbs.
Use above torque setting unless otherwise noted
Level of Difficulty
Easy
Installation difficulty levels are based on time
and effort involved and may vary depending on
the installer level of expertise, condition of the
vehicle and proper tools and equipment.
This is the first of two manuals
required to complete this installation.
The second manual is included with
your side bars / running boards.
NOTICE
Visit
www.luvernetruck.com
for a full-color copy of this
instruction manual, as well as helpful videos, guides and much more!
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
Periodic inspection of your product should be performed
to ensure all hardware and / or components remain secure.
To help prevent damage to the product or vehicle, refer to the specified
torque specifications when securing hardware during the installation process.
