CURTMFG.COM
•
PRODUCT SUPPORT: 877.287.8634
•
18088-INS-RA
•
07/06/2021
•
ECN7705
•
PAGE 6
Step 10
Position the wheel strap to be centered
on the bike's rear wheel. Insert the strap
into the latch as shown. Adjust the wheel
strap sleeve (#6) over the wheel and
pull the strap firmly through the latch.
To remove the strap, press and hold the release
lever while pulling the strap from the latch.
Step 11
To allow rear-vehicle access, the rack can be
tilted away from the vehicle. Support the rack
while rotating the release handle clockwise
allowing the rack to stop at its lowest position.
WARNING
When transporting heavier bikes such
as e-bikes, a team lift may be required
when changing rack positions to prevent
injury and / or product damage.
Do not transport the rack in the lowest position as
this may cause damage to the product or cargo.
Step 12
When transporting the rack with an empty tray
or trays, the rack components must be secured
as shown. Place the tire / frame hook beneath
the tray. Slight downward pressure on the
arm may be necessary while sliding the hook
inward. Ensure the wheel strap is buckled
and the cable is inserted fully into the arm.
When unloaded, the rack may be
transported in the vertical position.
