4
432-LIPPERT (432-547-7378)
Rev: 08.30.22
Picnic Popup Gazebo
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0006457
Manual information may be distributed as a complete
document only, unless Lippert provides explicit consent
to distribute individual parts.
All manual information is subject to change without
notice. Revised editions will be available for free
download at
. Manual information is
considered factual until made obsolete by a revised
version.
Please recycle all obsolete materials and contact
Lippert with concerns or questions.
Maintenance
• Picnic Popup Gazebo is
NOT
machine washable. Picnic
Popup Gazebo is
NOT
machine dryable.
• To clean the product, hand wash using mild dish washing
soap and soft bristle brush. Allow the fabric to completely
air dry.
• Wipe down all parts - steel, plastic, and fiberglass before
putting away for the next season’s use. Salt from ocean
air can cause damage.
• DO NOT
store Picnic Popup Gazebo while wet. Storing
wet can cause mildew.
• Salt, mildew and other causes and subsequent effects
are
NOT
covered under the limited warranty.
1.
To store the Picnic Popup Gazebo, remove all stakes
and guidelines.
2.
If applicable remove optional sun shade.
3.
Remove and dissemble door poles.
4.
Push in on the side panel hub
(Fig.3B)
from the outside
to collapse side panel. Repeat this step for all side panels.
Push down on the roof until collapsed.
Picnic Popup Gazebo Take Down
BE CAUTIOUS TO NOT USE EXCESSIVE FORCE TO
THE POLE STRUCTURES.
5.
Grab one corner of the Picnic Popup Gazebo base
and fold over in half. Fold remaining corners over until the
Gazebo is the same shape as in step 1.
6.
Carefully lift and insert disassembled Gazebo into the
carry bag, as well as the stakes, guy lines and poles.
Completed Picnic Popup Gazebo with Front Opening Panels Closed
