background image

Rev: 05.23.22

Page 3

CCD-0006230

The "WARNING" symbol above is a sign that a procedure has a safety risk involved and may  

cause death or serious personal injury if not performed safely and within the parameters  

set forth in this manual. 

Failure to follow instructions provided in this manual may result in death, serious personal injury 

and/or severe product and property damage, including voiding of the component warranty.

Always wear eye protection when performing service, maintenance or installation procedures. 

Other safety equipment to consider would be hearing protection, gloves and possibly a full face 

shield, depending on the nature of the task.

The “CAUTION” symbol above is a sign that a safety risk is involved and may cause personal injury 

and/or product or property damage if not safely adhered to and within the parameters set forth 

in this manual.

Moving parts can pinch, crush or cut. Keep clear and use caution.

Operation

When operating the Challenger door and  the door does not open with the remote, the BYPASS 

VALVE (Fig. 1A) 

MUST 

BE CLEARED OF AIR

 FIRST BEFORE OPENING THE DOOR

 with the key.  

Switch the bypass valve to the OPEN position (Fig. 1A) from the closed position (Fig. 1B). 

The Challenger Door Series 1520 is in use with an air compressor, which when in use, can cause  

the door to rapidly open. Should an error arise and the door does not open, ALWAYS drain the air out of 

the air compressor's bypass valve before attempting to manually open the door. There is NOT an object 

sensor on the door. Keep all people and personal property away from the door area when opening 

and closing the door. Failure to adhere to this warning will result in severe product and unit damage, 

including serious personal injury or death. 

Fig. 1 

Bypass Valve 

OPEN

A

B

Bypass Valve 

CLOSED

Содержание 1520 Series









Отзывы: