Lippert Components Solera Hybrid Скачать руководство пользователя страница 2

2

lci1.com      

574-537-8900    

 

Rev:  03.19.18

Solera

®

 Universal Hardware

Manual Awning to

Solera Hybrid Awning

(For Aftermarket Applications)

CCD-0001269

Introduction

System Information

The Solera

®

 Hybrid Awning is the next best thing to a power 

awning. Simple crank operation makes setting up camp fast 

and easy, and the Hybrid locks into place when retracted for 

safe travel. Skip the hassle and cost of wiring and enjoy an 

easy DIY upgrade from a manual awning. 

NOTE: 

The LCI Solera

®

 Universal Hardware kit for a manual 

to hybrid conversion will 

ONLY

 fit Dometic and Carefree 

awnings.

Additional Information Sources

Additional information about this product can be obtained 

fro

www.lci1.com/support

 or by using the myLCI app. 

Replacement components can be ordered fro

https://

store.lci1.com/

 or by using the myLCI app. The myLCI app is 

available for free on iTunes

®

 for iPhone

®

 and iPad

®

 and also 

on Google Play

 for Android

 users. 

iTunes, iPhone, and iPad are registered trademarks of Apple 

Inc. 
Google Play and Android are trademarks of Google Inc.

Safety Information

Warning, Caution and Danger symbols indicate that an 

installation procedure has a safety risk involved and may 

cause death, serious injury or property damage if not 

performed safely and within the parameters set forth in this 

manual.

Parts List

Manual awnings that contain springs use tension for ease 

of operation and can be harmful to the end user should the 

stored tension come unbound. Cotter pins, travel locks and 

cam locks are installed and 

MUST

 be used to contain the 

tension when the system is being serviced.

MOVING PARTS CAN PINCH, CRUSH OR CUT. KEEP 

CLEAR AND USE CAUTION.

FAILURE TO USE THE INSTALLED SAFETY FEATURES 

MAY RESULT IN DEATH, SERIOUS INJURY, DAMAGE TO 

THE UNIT AND/OR VOIDING A WARRANTY.

Universal Kit No. Description

434725

Solera

 Hybrid 60.5” Short Arm, 

2-position Pitch Standard Kit - Black

434726

Solera

 Hybrid 60.5” Short Arm, 

2-position Pitch Standard Kit - White

434727

Solera

 Hybrid 69” Tall Arm, Infinite 

Pitch Standard Kit - Black

434728

Solera

 Hybrid 69” Tall Arm Infinite 

Pitch Standard Kit - White

Содержание Solera Hybrid

















Отзывы: