2
574-537-8900
Rev: 02.25.20
Screen Defender
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0003487
Safety
Read and fully understand all instructions before installing
or operating this product. Adhere to all safety labels. This
manual provides general instructions. Many variables can
change the circumstances of the instructions, i.e., the
degree of difficulty, operation and ability of the individual
performing the instructions.
This manual cannot begin to plot out instructions for
every possibility, but provides the general instructions,
as necessary, for effectively interfacing with the device,
product or system.
Failure to correctly follow the provided instructions may
result in death, serious personal injury, severe product and/
or property damage, including voiding of the LCI
limited warranty.
THE “CAUTION” SYMBOL ABOVE IS A SIGN THAT A
PROCEDURE HAS A SAFETY RISK INVOLVED AND
MAY CAUSE PERSONAL INJURY, PRODUCT AND/OR
PROPERTY DAMAGE IF NOT PERFORMED SAFELY
AND WITHIN THE PARAMETERS SET FORTH IN THIS
MANUAL.
MOVING PARTS CAN PINCH, CRUSH OR CUT. KEEP
CLEAR AND USE CAUTION.
THE “WARNING” SYMBOL ABOVE IS A SIGN THAT
AN INSTALLATION PROCEDURE HAS A SAFETY
RISK INVOLVED AND MAY CAUSE DEATH, SERIOUS
PERSONAL INJURY, SEVERE PRODUCT AND/OR
PROPERTY DAMAGE IF NOT PERFORMED SAFELY
AND WITHIN THE PARAMETERS SET FORTH IN THIS
MANUAL.
Introduction
The Screen Defender is a metal mesh insert that will be
attached to the interior of an RV entry screen door to
prevent accidental damage to the screen. The included
extrusions fill gaps in the door if the opening is more than
20” in height.
Additional information about this product can be obtained
from
or by using the myLCI app.
Replacement kits can be ordered from
or by using the myLCI app.
The myLCI app is available for free on iTunes
®
for iPhone
®
and iPad
®
and also on Google Play
™
for Android
™
users.
iTunes
®
, iPhone
®
, and iPad
®
are registered trademarks of
Apple Inc.
Google Play
™
and Android
™
are trademarks of Google Inc.
Purchase Verification
XX
”
- To verify the proper size of the Screen Defender required,
measure frame to frame
(Fig.1)
of the unit door and round up to
the nearest even number (i.e., 24”, 26”, 28, 30”). This number
should correspond to the Screen Defender purchased.
XX
"
XX
"
edge of
doorframe
NOTE:
Images used in this document are for reference
only when assembling, installing and/or operating this
product. Actual appearance of provided and/or purchased
parts and assemblies may differ.
Fig.1