Rev: 12.02.20
Page 4
CCD-0003430
Fig. 1
Operation
NOTE:
The Power Stance power tongue jack can be operated by utilizing either a battery stored in the
trailer, or by drawing power from the tow vehicle using the optional Power Swap Auxiliary Cord™.
NOTE:
When RET (Fig. 2A) or EXT (Fig. 2B) on the switch is pushed, the light above the switch (Fig. 3A) will
turn on automatically, and remain on for five minutes. It will then automatically turn off.
NOTE:
The Power Stance tongue jack is designed for vertical movement of the trailer only.
Unhitching From Tow Vehicle
1.
Chock the tires of the trailer.
2.
Make sure the footpad of the Power Stance power tongue jack is pinned securely in place with the
clevis pin and hairpin cotter pin (Fig. 1A).
A
3.
Make sure the ground surface under the Power Stance tongue jack is firm and level.
4.
Push EXT (Fig. 2B) to extend the Power Stance tongue jack until the footpad touches the ground and
the coupler clears the hitch ball.
NOTE:
When RET (Fig. 2A) or EXT (Fig. 2B) is pushed, the light above the switch (Fig. 3A) will turn on
automatically, and remain on for five minutes. It will then automatically turn off.
5.
Disconnect all electrical and mechanical connections between the trailer and tow vehicle.
NOTE:
Chains can be stored on the chain holder (Fig. 2D) when not in use.
6.
Move the tow vehicle away from the trailer.
7.
Push RET (Fig. 2A) as needed to return the front of the trailer to level.
Fig. 2
Fig. 3
A
A
B
C
D
Содержание Power Stance
Страница 1: ...Power Stance Tongue Jack OWNER S MANUAL...
